|
Product Overviews |
Archive Reviews |
Comparison Tables |
Tables |
Metals Guide |
Frank's Picks |
News & Gossip
| |
| Additional Knowledgable Resources | |
|
Reach BikePro on a 24 hour basis at 803-280-1537 Terry Dunbar is on duty as the technical expert, who also speaks Spanish as well as English and has quantities on hand information. Call her now for any questions about Bike Pro you may have. |
![]() |
|
Bottom Brackets Brake Systems
Computers Cranks and Chainrings Forks Frames & Framesets Freewheels and Cassettes Front Derailleurs Grips Handlebars Handlebar Extensions Headsets Helmets Hubs and Skewers Lubricants Metal Guide - Bicycle Metallurgy Mirrors Pedals and Toe Clips Pumps and Inflation Systems Racks Rear Derailleurs Rims & Rimstrips Saddles Seatposts and Binder Bolts SRP Replacement Titanium & Aluminum parts - Master Index Stems Tires Tubes Shoes Spokes (Tables Only) Tools - Bicycle Repair Tools Yakima Fit List -to fit all cars Notes Home |
& Storm Control Tires
SPECIALIZED MORE EXTREMEThe Ground Control Extreme tire was released in 1991 model year capitalizing on the success of the Ground Control tire. The GC Extreme later became known as the "Extreme". The More Extreme, with a tread design by Wilderness Trail Bikes, is the successor to the Extreme tire which has been discontinued for the 1993 model year. The More Extreme is a 26 x 1.95" tire that's made in Japan. It has a steel wire bead and comes in a Skin sidewall only. The More Extreme tread pattern repeats at 1.8" intervals with just four large tread blocks comprising the pattern. Down the center is a horizontal tread block that resembles a "dog bone" with an off center break in it. Two of these "dog bone" blocks are used, offset at opposing sides with a 2.5mm wide, 4mm deep sipe running across the top. On the short side of each of the center blocks are large massive U-shaped blocks that have sidewall support. We tested the More Extreme tread rubber and found it had a hardness of 62/A. More Extreme 26 x 1.95 $ Price in Catalog
SPECIALIZED MORE EXTREME/SThere is a Kevlar beaded tire bearing the More Extreme name, but its tread pattern has little resemblance to the wire bead More Extreme. Made in Japan, this folding tire comes in two sizes, 26 x 1.95" or 26 x 2.5" and uses the Umma Gumma Grey rubber tread compound. The More Extreme/S has two multi-sided blocks designed on a U-shaped abstraction with the bases resting near each other. One of the U-shaped blocks is larger than the other. Between them is a 3.5mm wide gap. At the sides of each center block set is compound double block set that runs in the vertical direction, with sloping sides off the inner most of the two joining the outermost "edge" tread block. The edge block has supports that rise up to join it from the sidewall. Since there are no directional markings on the tire, a question remains as to which of the U-shaped blocks should be facing forward. Our durometer test for rubber hardness on the More Extreme/S 1.95" showed a 62/A hardness, while the 2.5" size was unavailable for testing. More Extreme/S 26 x 1.95"- Kevlar/Skin/Grey $ Price in Catalog
SPECIALIZED STORM CONTROLThe Storm Control tread pattern was designed by Wilderness Trail Bikes. The tire is made in two sizes, 26 x 1.8" and 26 x 2.2". Both are made in Japan, with steel wire beads and Skin sidewalls. The tread on the two tires is largely similar, but has differences. The 26 x 1.8" has tread blocks that are somewhat larger and in less number than those on the 26 x 2.2" sized Storm Control. The tread blocks down the center are bird egg shaped with the narrow end pointing outward. The top of the block is narrower than the base. The edge blocks again are in the shape of bird eggs with one third of the length cut from the narrow end. The 2/3 egg edge blocks are fashioned in a small and large size, with one small and one large placed in the same rank with each repetition of the tread pattern, so they alternate small, large, small around the circumference of the tire. The 26 x 1.8" size has sipes cut in the line of travel across the top of the large egg shaped tread blocks. The tread rubber hardness on both tested very close to the same, the 1.8" wide tire was 64/A and the 2.2" wide tire was 63/A. Storm Control 26 x 1.8" $ Price in Catalog |
|
In-depth Information About Metals Aluminum Aluminum is extracted electrolytically from bauxite ore. It is made by the electrolysis of aluminum oxide which is found in larger concentrations within bauxite ore. Bauxite is a mixture of the hydroxides of aluminum, together with other impurities such as oxides of iron, titanium, and silicon. Bauxite is produced by the weathering and change of aluminum silicate rocks usually found in tropical and semitropical regions where climate has produced an accelerated weathering process. Bauxite is not a rare ore and is widely available in the US, the Caribbean, and Europe. Approximately 4 pounds of read the full article... Beryllium Beryllium is a specialty metal that is steel-grey metal in color, with an extremely low density, making it very light weight. At 1.85 grams to the cubic centimeter, its density compares to that of magnesium. It is also a high strength metal, making it possible to design light weight, thin membered parts with ahigh stiffness. A column made of beryllium to support a load placed directly downward on top of it, will have a greater load carrying capacity, and be lower in weight than any other metal of equal size. Until the 1950's beryllium was used read the full article... Titanium The element titanium was discovered in 1763 by an English cleric, William Gregor who was an amateur chemist with an inquiring mind. It was in the black sands of Cornwall that he discovered the new element that had up to that time, attracted little scientific interest. A few years later, an Austrian, Klaproth, extracted the same element from an ore widely known as "rutile", which is a mineral consisting of titanium dioxide (one titanium atom, two oxygen atoms), that is a reddish-brown substance with a slight metallic luster. While rutile is the highest grade read the full article... Metallurgic Hardness Testing There are three types of tests used with accuracy by the metals industry,they are the Brinell hardness test, the Rockwell hardness test, and the Vickers hardness test. Hardness is the property of a metal which gives it the ability to resist being permanently deformed (bent, broken, or have its shape changed), when a load is applied. The greater the hardness of the metal, the greater resistance it has to deformation. Since the definitions of metallurgic ultimate strength and hardness are rather similar, it can generally be assumed read the full article... |
