Reach BikePro on a 24 hour basis at 803-280-1537 Terry Dunbar is on duty as the technical expert, who also speaks Spanish as well as English and has quantities on hand information. Call her now for any questions about Bike Pro you may have.
|
Product Overviews |
Archive Reviews |
Comparison Tables |
Tables |
Metals Guide |
Frank's Picks |
News & Gossip
| |
| Additional Knowledgable Resources | |
|
Reach BikePro on a 24 hour basis at 803-280-1537 Terry Dunbar is on duty as the technical expert, who also speaks Spanish as well as English and has quantities on hand information. Call her now for any questions about Bike Pro you may have. |
|
|
Bottom Brackets Brake Systems
Computers Cranks and Chainrings Forks Frames & Framesets Freewheels and Cassettes Front Derailleurs Grips Handlebars Handlebar Extensions Headsets Helmets Hubs and Skewers Lubricants Metal Guide - Bicycle Metallurgy Mirrors Pedals and Toe Clips Pumps and Inflation Systems Racks Rear Derailleurs Rims & Rimstrips Saddles Seatposts and Binder Bolts SRP Replacement Titanium & Aluminum parts - Master Index Stems Tires Tubes Shoes Spokes (Tables Only) Tools - Bicycle Repair Tools Yakima Fit List -to fit all cars Notes Home |
Phil Wood Bike ProductsPHIL WOOD TENACIOUS OIL
This oil clings to the sliding spaces tightly, but moves very freely." says the side of the container. Phil Oil gives the appearance of a heavy thick oil, but it's green syrupy nature disguises it's lubricating quality. Once applied the lubricant stays and provides a slippery surface. A long standing favorite of many. $ Price in Catalog PHIL WOOD WATERPROOF BICYCLE GREASE
This is the first of the bike specialty greases and comes in the form of a transparent Green gel. The "waterproof" in the name means two things for this grease. First, it refers to the inhibitors in the grease, which prevent rust and corrosion under the wettest conditions, including salt water. Second, the grease resists absorption of water so that it does not swell and become displaced from the bearing it is lubricating. The mineral oil used has lubricity exceeding that of any silicone, and will not produce surface contamination. It comes in a three ounce (85 gram) squeeze tube. $ Price in Catalog |
|
In-depth Information About Metals Aluminum Aluminum is extracted electrolytically from bauxite ore. It is made by the electrolysis of aluminum oxide which is found in larger concentrations within bauxite ore. Bauxite is a mixture of the hydroxides of aluminum, together with other impurities such as oxides of iron, titanium, and silicon. Bauxite is produced by the weathering and change of aluminum silicate rocks usually found in tropical and semitropical regions where climate has produced an accelerated weathering process. Bauxite is not a rare ore and is widely available in the US, the Caribbean, and Europe. Approximately 4 pounds of read the full article... Beryllium Beryllium is a specialty metal that is steel-grey metal in color, with an extremely low density, making it very light weight. At 1.85 grams to the cubic centimeter, its density compares to that of magnesium. It is also a high strength metal, making it possible to design light weight, thin membered parts with ahigh stiffness. A column made of beryllium to support a load placed directly downward on top of it, will have a greater load carrying capacity, and be lower in weight than any other metal of equal size. Until the 1950's beryllium was used read the full article... Titanium The element titanium was discovered in 1763 by an English cleric, William Gregor who was an amateur chemist with an inquiring mind. It was in the black sands of Cornwall that he discovered the new element that had up to that time, attracted little scientific interest. A few years later, an Austrian, Klaproth, extracted the same element from an ore widely known as "rutile", which is a mineral consisting of titanium dioxide (one titanium atom, two oxygen atoms), that is a reddish-brown substance with a slight metallic luster. While rutile is the highest grade read the full article... Metallurgic Hardness Testing There are three types of tests used with accuracy by the metals industry,they are the Brinell hardness test, the Rockwell hardness test, and the Vickers hardness test. Hardness is the property of a metal which gives it the ability to resist being permanently deformed (bent, broken, or have its shape changed), when a load is applied. The greater the hardness of the metal, the greater resistance it has to deformation. Since the definitions of metallurgic ultimate strength and hardness are rather similar, it can generally be assumed read the full article... |
